0xD006 (vendor extension property)
Acquires error information. Read only.
UINT32
| Value | Error code | Able to shoot | Desription | Recommended action |
|---|---|---|---|---|
| 0x00000001 | Insufficient memory | No | Issued when the shutter release button is pressed while the number of remaining available shots is "0". | Delete files |
| 0x00000004 | Excessive file number | No | Issued when the maximum file number is exceeded. Restored by resetting the file number. |
Delete 999 folder or delete 9999 file |
| 0x00000008 | Clock unset | Yes | Issued when the internal clock of the camera is not set. | Set Date/Time via API, UI, or NTP |
| 0x00000010 | Electronic compass error | Yes | Issued when there is an error with the electronic compass. | Move the camera with ∞ pattern |
| 0x00000020 | Not supported media type | Yes | Unsupported media (SDHC, etc.) | Use microSDXC card |
| 0x00000040 | Not supported file system | Yes | Unsupported format (FAT32, etc.) | Format the microSD card |
| 0x00000100 | Media not ready | Yes | Error warning while mounting | Wait for the microSD card is mounted |
| 0x00000200 | Not enough battery | Yes | Battery level warning (firmware update) | Charge battery |
| 0x00000400 | Invalid file | Yes | Firmware file mismatch warning | Retry firmware update |
| 0x00000800 | Plugin boot error | Yes | Plugin start warning (IoT technical standards compliance) | Disconnect from internet |
| 0x00001000 | In progress error | No | When performing continuous shooting by operating the camera while executing <Delete object>, <Transfer firmware file>, <Install plugin> or <Uninstall plugin> with the WebAPI or MTP. | Wait for the processing finished |
| 0x00001000 | Cannot recording | No | Battery inserted + WLAN ON + Video mode + 4K 60fps / 5.7K 10fps / 5.7K 15fps / 5.7K 30fps / 8K 10fps | Turn off WLAN |
| 0x00002000 | Cannot record for low battery | No | Battery inserted AND Specified battery level or lower + WLAN ON + Video mode + 4K 30fps | Charge the battery |
| 0x00400000 | Shooting hardware failure detection | No | Issued when a failure has been detected with hardware used for shooting. | Reboot the camera may help |
| 0x00800000 | Software error | No | Software error. | Reboot the camera may help |
| 0x08000000 | Internal memory access error | No | Issued when the internal memory of the camera cannot be accessed. | Reboot the camera may help |
| 0x20000000 | Miscellaneous error | No | An error other than above. | Reboot the camera may help |
| 0x40000000 | Charging error | No | Issued when the a USB charging error has been detected. The camera is powered off when this error occurs. | Check USB cable or charger |
| 0x00100000 | (Board) temperature warning | Yes | Issued when the internal temperature of the camera is close to the upper limit temperature. | Cool the camera |
| 0x80000000 | (Board) temperature error | No | Issued when the internal temperature of the camera is higher than the upper limit temperature. The camera is powered off when this error occurs. | Cool the camera |
| 0x00200000 | Battery temperature error | No | Issued when the battery temperature of the camera is higher than the upper limit temperature. The camera is powered off when this error occurs. | Cool the camera |
| Value | Error code | Able to shoot | Desription | Recommended action |
|---|---|---|---|---|
| 0x00000001 | Insufficient memory | No | Issued when the shutter release button is pressed while the number of remaining available shots is "0". | Delete files |
| 0x00000004 | Excessive file number | No | Issued when the maximum file number is exceeded. Restored by resetting the file number. |
Delete 999 folder or delete 9999 file |
| 0x00000008 | Clock unset | Yes | Issued when the internal clock of the camera is not set. | Set Date/Time via API, UI, or NTP |
| 0x00000010 | Electronic compass error | Yes | Issued when there is an error with the electronic compass. | Move the camera with ∞ pattern |
| 0x00000800 | Plugin boot error | Yes | Plugin start warning (IoT technical standards compliance) | Disconnect from internet |
| 0x00100000 | (Board) temperature warning | Yes | Issued when the internal temperature of the camera is close to the upper limit temperature. | Cool the camera |
| 0x00400000 | Shooting hardware failure detection | No | Issued when a failure has been detected with hardware used for shooting. | Reboot the camera may help |
| 0x08000000 | Internal memory access error | No | Issued when the internal memory of the camera cannot be accessed. | Reboot the camera may help |
| 0x20000000 | Miscellaneous error | No | An error other than above. | Reboot the camera may help |
| 0x40000000 | Charging error | No | Issued when the a USB charging error has been detected. The camera is powered off when this error occurs. | Check USB cable or charger |
| 0x80000000 | (Board) temperature error | No | Issued when the internal temperature of the camera is higher than the upper limit temperature. The camera is powered off when this error occurs. | Cool the camera |
| 0x00200000 | Battery temperature error | No | Issued when the battery temperature of the camera is higher than the upper limit temperature. The camera is powered off when this error occurs. | Cool the camera |